Practical computer set up

In this blog page i am going to show you how to correctly connect camera, speakers, printer into computer. 

Connecting Camera to the Desktop Computer

I am going to tell you step by step how to connect carefully camera to the computer. first all before we connect anything into computer we must make sure that computer cables which are connected into the electrical cord by simply turning off the electrical cord.

Then we must find the suitable USB cable which will fit into the camera's USB port, we must connect the USB cable first into the camera . Make sure that you have connected the USB cable to the Camera carefully

this photo shows is what i did after i have plugged the USB to the base unit and camera, i have turned on the camera .

Then after we have connected the USB cable into the camera, now we have to connect the other side of the USB cable into the computers Base Unit USB port, try to connect the USB cable to the USB port gently and don't squeez as it can damage the USB cable and USB port

After we have connected Correctly the USB cable to the camera and to the computer. Now we can turn on the computer by  putting the computer power cables back to the electrical cord and then switch on the electrical. cord

Now i am going to show you , what is going to happen after the computer is on and the camera is pluged into the computer.

when the camera is correctly to the USB and to the computer , the message should appear on the computers screen which should say something like this:

when this message show up with the green tick it means that your camera is being connected to the computer correctly. but if the message shows up with the red cross it means that you didn't correct the camera or USB cable correctly into the computer.

After the camera is being correctly connected into the computer, we now can click ''close'' that message and now we have to double click on the ''computer'' and it should show the camera file , double click on the camera file and open the camera folder, then it should show all the pictures which is being stored inside the camera. 

Connecting  speakers into computer. 

Here is the pictures of the speakers which i am going to use for showing you how to connect correctly to the computer

Before we connect the speakers into the computers , we must make sure that computer is totally off by switching off the electrical cord where the computer power cables are connected. 

these are the cables which i am going to connect into the back of the computer Base Unit , these are the speaker cables . one cable is USB and the other green cable is for the Speaker sound

this photo shows where i had connected the speakers too

here is the photo of the speakers after is being connected at the back of the base unit

after when you got the speakers connected now you can switch the computer on, by simply turning on the electrical cord which got computer power cables connected.

Now we are going to test if the speakers are working correctly. i am just going to show you the proof that speakers are working correctly or not by turning on some music video on the you tube.

here is the pictures of the speakers after they being connected to the computer correctly, when the speakers is being connected to computer correctly in my speakers the green light appears which means the speakers are on :

you can check the proof that speakers are tested and working fully by just clicking on this video :